Как поднять свой socks5-сервер для Telegram

Для работы простого socks5-сервера вам понадобиться виртуальная машина на каком-нибудь хостинге и Ubuntu 16.04 LTS. Настраивать будем Dante Server 1.4.2, эта версия поддерживает работу с авторизованными пользователями и в ней исправлены многие ошибки.

 

Как поднять свой socks5-сервер для Telegram 1

 

 

SOCKS — сетевой протокол, который позволяет клиент-серверным приложениям прозрачно использовать сервисы за фаерволами. SOCKS базируется на стандарте TCP/IP  и позволяет работать с любыми протоколами (версия Socks 4 – с TCP, Socks 5 – с TCP и UDP). SOCKS proxy просто передает данные от клиента к серверу, не вникая в содержимое самих данных (поэтому он может работать с HTTP, FTP, SMTP, POP3, NNTP, etc.).

 

1. Установка Dante Server

Сразу включим учётную запись администратора:

 

sudo su

 

Скачаем и разархивируем исходники сервера:

 

cd /opt
wget http://www.inet.no/dante/files/dante-1.4.2.tar.gz
tar -xvf dante-1.4.2.tar.gz
cd dante-1.4.2/

 

Установим необходимые утилиты и зависимости:

 

apt-get install gcc libwrap0 libwrap0-dev libpam0g-dev make checkinstall

 

Подготовим файлы dante для компиляции:

 

mkdir /opt/dante
./configure --prefix=/opt/dante

 

Получим статус конфигурации:

 


Client:            Enabled
Server:            Enabled
Preloading:        Enabled
Libwrap:           Enabled
BSD Auth:          Disabled, usable bsd_auth.h not found
PAM:               Enabled
GSSAPI:            Not found/disabled
KRB5:              Not found/disabled
SASL:              Not found/disabled
UPNP:              Not found/disabled
Compatability:     issetugid setproctitle strlcpy strvis

                     Modules:

redirect:          Not found
bandwidth:         Not found
ldap:              Not found

 

Компилируем:

 

make

 

Упаковываем в пакет и устанавливаем:

 

checkinstall

 

Проверяем работу:

 

/opt/dante/sbin/sockd -v
Dante v1.4.2.  Copyright (c) 1997 - 2014 Inferno Nettverk A/S, Norway

 

2. Настройка сервера

Создадим пользователи и установим пароль:

 

useradd -s /bin/nologin telegram
passwd telegram

 

Узнаем название сетевого интерфейса:

 

ifconfig

eth0      Link encap:Ethernet  HWaddr 00:50:56:bd:74:65
lo        Link encap:Local Loopback

 

Предположим, что он называется  eth0. Пропишем его в конфигурационном файле:

 

nano /etc/sockd.conf

 

Содержимое файла:

 

#logoutput: /var/log/socks.log
logoutput: stderr

# На каком сетевом интерфейсе и порту обслуживаем socks клиентов
internal: eth0 port = 1080
# С какого IP или интерфейса выходим во внешний мир
external: eth0
#internal: x.x.x.x port = 1080
#external: x.x.x.x

# Используемый метод авторизации клиентов. none — без авторизации.
socksmethod: username
#socksmethod: username none
user.privileged: root
user.notprivileged: nobody

client pass {
        from: 0.0.0.0/0 to: 0.0.0.0/0
        log: error connect disconnect
}

client block {
        from: 0.0.0.0/0 to: 0.0.0.0/0
        log: connect error
}

socks pass {
        from: 0.0.0.0/0 to: 0.0.0.0/0
        log: error connect disconnect
}

socks block {
        from: 0.0.0.0/0 to: 0.0.0.0/0
        log: connect error
}

 

Ещё один вариант настройки конфигурации:

 

logoutput: syslog stdout /var/log/sockd.log
internal: x.x.x.x port = 1080
external: x.x.x.x
socksmethod: username 
user.privileged: root
user.unprivileged: nobody
user.libwrap: nobody
client pass
{
from: 0.0.0.0/0 to: 0.0.0.0/0
log: error
}
client block {
from: 0.0.0.0/0 to: 127.0.0.0/8
log: connect error
}
socks pass
{
from: 0.0.0.0/0 to: 0.0.0.0/0
command: connect
log: error
socksmethod: username
}

 

 

 

 

 

 

3. Автоматический запуск сервера

Для того, чтобы запуск сервера происходил при старте системы, соберём модуль запуска. Для этого необходимо создать файл /etc/init.d/sockd с таким содержимым:

 

#! /bin/sh
### BEGIN INIT INFO
# Provides:          sockd
# Required-Start:    $remote_fs $syslog
# Required-Stop:     $remote_fs $syslog
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: Start the dante SOCKS server.
# Description:       SOCKS (v4 and v5) proxy server daemon (sockd).
#                    This server allows clients to connect to it and
#                    request proxying of TCP or UDP network traffic
#                    with extensive configuration possibilities.
### END INIT INFO
#
# dante SOCKS server init.d file. Based on /etc/init.d/skeleton:
# Version:  @(#)skeleton  1.8  03-Mar-1998   
# Via: https://gitorious.org/dante/pkg-debian

PATH=/sbin:/usr/sbin:/bin:/usr/bin
NAME=sockd
DAEMON=/opt/dante/sbin/$NAME
DAEMON_ARGS="-D"
PIDFILE=/var/run/$NAME.pid
SCRIPTNAME=/etc/init.d/$NAME
DESC="Dante SOCKS daemon"
CONFFILE=/etc/$NAME.conf

# Exit if the package is not installed
[ -x "$DAEMON" ] || exit 0

# Load the VERBOSE setting and other rcS variables
. /lib/init/vars.sh

# Define LSB log_* functions.
# Depend on lsb-base (>= 3.2-14) to ensure that this file is present
# and status_of_proc is working.
. /lib/lsb/init-functions

set -e

# This function makes sure that the Dante server can write to the pid-file.
touch_pidfile ()
{
  if [ -r $CONFFILE ]; then
    uid="`sed -n -e 's/[[:space:]]//g' -e 's/#.*//' -e '/^user\.privileged/{s/[^:]*://p;q;}' $CONFFILE`"
    if [ -n "$uid" ]; then
      touch $PIDFILE
      chown $uid $PIDFILE
    fi
  fi
}

case "$1" in
  start)
    if ! egrep -cve '^ *(#|$)' \
        -e '^(logoutput|user\.((not)?privileged|libwrap)):' \
        $CONFFILE > /dev/null
    then
        echo "Not starting $DESC: not configured."
        exit 0
    fi
    echo -n "Starting $DESC: "
    touch_pidfile
    start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON --test > /dev/null \
        || return 1
    start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON -- \
        $DAEMON_ARGS \
        || return 2
    echo "$NAME."
    ;;
  stop)
    echo -n "Stopping $DESC: "
    start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --pidfile $PIDFILE --name $NAME
    RETVAL="$?"
    [ "$RETVAL" = 2 ] && return 2
    start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON
    [ "$?" = 2 ] && return 2
    echo "$NAME."
    ;;
  reload|force-reload)
    #
    #   If the daemon can reload its config files on the fly
    #   for example by sending it SIGHUP, do it here.
    #
    #   Make this a do-nothing entry, if the daemon responds to changes in its config file
    #   directly anyway.
    #
     echo "Reloading $DESC configuration files."
     start-stop-daemon --stop --signal 1 --quiet --pidfile \
        $PIDFILE --exec $DAEMON -- -D
  ;;
  restart)
    #
    #   If the "reload" option is implemented, move the "force-reload"
    #   option to the "reload" entry above. If not, "force-reload" is
    #   just the same as "restart".
    #
    echo -n "Restarting $DESC: "
    start-stop-daemon --stop --quiet --pidfile $PIDFILE --exec $DAEMON
    sleep 1
    touch_pidfile
    start-stop-daemon --start --quiet --pidfile $PIDFILE \
      --exec $DAEMON -- -D
    echo "$NAME."
    ;;
  status)
    status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $?
    ;;
  *)
    N=/etc/init.d/$NAME
    # echo "Usage: $N {start|stop|restart|reload|force-reload}" >&2
    echo "Usage: $N {start|stop|restart|status|force-reload}" >&2
    exit 1
    ;;
esac

exit 0

 

Сделаем скрипт запуска исполняемым:

 

chmod +x /etc/init.d/sockd

 

Обновим конфигурацию демонов:

 

systemctl daemon-reload

 

И включим модуль:

 

systemctl enable sockd

 

Запустим Dante server:

 

systemctl start sockd

 

Перезагрузим конфигурацию:

 

systemctl enable danted && systemctl restart danted

 

4. Формируем ссылку для Telegram

https://t.me/socks?server=example.com&port=9999&user=username&pass=password

 

 

 

 

 

 

 

 


 

Спасибо, что читаете! Подписывайтесь на меня в социальных сетях Facebook, Twitter, VKOK и мессенджерах Telegram и TamTam!

 

Читайте анонсы и посты целиком в ЖЖ, Medium, Голосе и Яндекс.Дзен!

 

Поддержите мой блог финансово. Все донаты пойдут на оплату хостинга и развитие сайта!

 

 


 

Подписаться
Уведомление о
guest
1 Комментарий
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
trackback
Как обойти блокировку Telegram. Устанавливаем свой VPN-сервер
5 лет назад

[…] вам для обхода блокировки Telegram не хватает собственноручно…, то можно развернуть OpenVPN. Это решение позволит […]

1
0
Прочитали? Прокомментируйте!x
Яндекс.Метрика